PROTEGO Products:

Explosion and environmental protection during processing , storage and transport of inflammable liquids and gases , in particular covering industries in chemical , oil & refining , exhaust gas systems , transport systems , waste water , biogas & dumping ground gas systems and cryogenic storage tanks : All Explosion Protection by PROTEGO

 

 

1) Pressure and Vacuum relief valve combination comprising an explosion and endurance burning proof PROTEGO pressure relief valve and an explosion proof PROTEGO vacuum relief valve (end-of-line) for flameproof ventilation of storage tanks.
2) PROTEGO detonation flame arrester for installation into pipelines (in-line) to protect pipelines (example ; explosion-hazardous plants connected to pipeline systems.
3) Combination PROTEGO pressure and vacuum relief valve (end-of-line) - explosion proof and endurance burning proof - for ventilation of storage tanks.
4) Detonation proof pressure/vacuum relief systems, comprising a PROTEGO detonation flame arrester and a combined PROTEGO pressure and vacuum relief valve (in-line) for closed tank ventilation - connection to off-gas and blanketing systems.
5) PROTEGO deflagration flame arrester (in-line), providing explosion protection in case of deflagrations - for installation into pipelines in front of incinerators with integrated measuring of pressure drop, temperature control and steam jet nozzles.
6) PROTEGO flameproof vent cap (end-of-line) for protection against endurance burning and atmospheric  explosions, for pressure less ventilation of tanks, gasometers and other explosion-hazardous plants.
7) Detonation proof pipe away valve system, comprising a PROTEGO detonation flame arrester and a PROTEGO detonation flame arrester and a PROTEGO pressure relief valve with non return valve (in-line) for closed tank out breathing systems
8) PROTEGO deflagration flame arrester (in-line) as well as pre-volume flame arrester (in-line) for protection of plants where, due to the existing  installation conditions, only deflagrations (example; pre-volume explosions may occur).
9) PROTEGO pressure and vacuum diaphragm valve (end-of-line) for safety against atmospheric explosions and endurance burning in frost proof design for ventilation of storage tanks under pressure (example; vacuum and other explosion-hazardous processing plants.
10) Bi-directional PROTEGO detonation flame arrester (in-line) for protection of systems which have to be protected from both sides against possible deflagrations (example; detonations).

 
11) PROTEGO liquid poduct flame arrester (in-line) for protection of filling and emptying lines of storage tanks - for external installation.

 
12) PROTEGO liquid product flame arrester (in-line) for protection of filling and emptying lines of storage tanks - for external installation.

 
13) Float-operated PROTEGO swivel joint pipe system to suck off product below surface.